25% off store-wide — automatically applied at checkout.
🇺🇸 US orders ship duty-free — no tariffs, duties, or extra fees at delivery

How to Black Out Car Emblems Without Removing Them

By the OverlayCo team · Updated

The easiest way to black out chrome emblems without removing them is a model-specific emblem overlay: a thin, pre-shaped black shell that sticks on top of the factory badge with automotive adhesive tape. Clean the emblem with rubbing alcohol, let it dry, peel the backing, line the overlay up and press it firmly for about 30 seconds. Most emblems take under five minutes, and the overlay can be removed later with gentle heat.

What is an emblem overlay?

An emblem overlay is a black cover moulded to the exact shape of a specific factory emblem, such as the KIA logo on a 2023+ Telluride or the 'SANTA FE' lettering on a 2024+ Santa Fe. It sits on top of the original chrome badge, so the badge never has to come off the car.

Because the overlay is three-dimensional, it keeps the raised look of the original emblem. Flat vinyl decals can't do that. OverlayCo overlays are made from zinc-alloy metal or automotive ABS plastic and come in gloss or matte black.

Before you start: check fitment

Overlays are made for one emblem shape, so the kit has to match your vehicle exactly. Check these before ordering:

  • Model year. Badges often change shape with a redesign. For example, the 2026 Palisade uses different emblems from earlier years.
  • Trim. Trim badges such as LE, SE, XLE or XSE are different pieces.
  • Powertrain. Hybrid models usually carry extra badges ('HYBRID', 'HTRAC'), so hybrid kits include more pieces.
  • Body style. Sedan and hatchback or SUV and coupe versions can use different rear emblems.

What you need

  • Your overlay kit
  • Rubbing (isopropyl) alcohol and a clean microfibre cloth
  • A hair dryer (optional, helps the adhesive grab in cool weather)

How to install emblem overlays, step by step

  1. Wash and dry the area around the emblem.
  2. Wipe the chrome emblem with rubbing alcohol to remove wax, grease and road film. Let it dry completely.
  3. Dry-fit the overlay without removing the backing, so you know exactly how it lines up.
  4. Peel off the protective backing. In cool weather, warm the adhesive with a hair dryer for about 5 seconds.
  5. Align the overlay over the factory emblem and press firmly across the whole surface for 30 seconds.
  6. Let the adhesive cure for 48 hours before washing the car.

Tips for a clean, long-lasting result

  • Install in mild weather or a warm garage. Adhesive tape bonds poorly to cold surfaces.
  • Don't touch the adhesive with your fingers; skin oils weaken the bond.
  • Press from the centre outward so there are no air pockets under the edges.
  • After the 48-hour cure, overlays are car-wash safe and weatherproof.

How to remove emblem overlays later

Warm the overlay with a hair dryer for a minute to soften the adhesive, then peel it off slowly. Any adhesive left on the chrome can be rolled off with your thumb or cleaned with an adhesive remover that is safe for automotive paint. The original emblem underneath isn't damaged, which makes overlays a good choice for leased cars or before a trade-in.

Frequently asked questions

Do emblem overlays damage paint or the original emblem?
No. Overlays stick to the chrome emblem, not the paint, and come off with gentle heat without damaging the badge underneath.
How long does it take to black out emblems with overlays?
Usually under five minutes per emblem, plus a 48-hour cure before the first wash.
Can I put overlays on a leased car?
Yes. Because nothing is removed or painted, overlays can be peeled off before you return the car.

Related